Kenyelletso ea sehlahisoa
● Karolo e ka Sehloohong:
● Thepa e ka ba ho sila likoti le li-slots lifahleho tse ka pele le tse ka morao tsa li-profile, ebe li khaola li-profiles 45 ° kapa 90 ° ka mor'a ho siloa.
● Ho sebetsa hantle haholo:
● 45 ° saw blade e khannoa ke servo motor ho etsa bonnete ba hore lebelo le phahameng le ho itšeha ka mokhoa o ts'oanang, ts'ebetso e phahameng ea ho itšeha.
● Hlooho ea laser ea ho itšeha le ho ngola e ka fetoloa ka tsela e iketsang ho latela litlhoko tsa ts'ebetso.Ho itšeha ka laser, ts'ebetso e phahameng, boleng bo botle ba ho itšeha.
● Mono-block casting mofuta oa motheo oa enjene e kholo.Li-angles tse tharo tse tsitsitseng: tse peli tse 45 ° le tse ling tse 90 °.
● Wide mefuta e fapaneng: ho itšeha bolelele 350～6500mm, bophara 110mm, bophahamo 150mm.
● Sekhahla sa saw se qoba ho fiela sebaka sa ho itšeha ha se khutla (patent ea rona), eseng feela ho ntlafatsa qetello ea sebaka sa ho itšeha, empa hape le ho fokotsa li-burrs, le ho ntlafatsa haholo bophelo ba tšebeletso ea lehare la saw.
● Sebopeho sa "Z" se nang le tokelo ea molao se nang le mekhahlelo e 'meli, ho qoba fan "Z" ha u tobetsa mokhoa oa ho sekama;
● Ntle le basebetsi ba nang le litsebo, ho fepa ka mokhoa o itekanetseng, ho cheka le ho sila, ho seha, ho laolla le ho hatisa ka mokhoa o itekanetseng le ho pata khoutu ea bar.
● Ka ts'ebetso ea ts'ebeletso e hole (tlhokomelo, tlhokomelo, koetliso), ho ntlafatsa ts'ebetso ea ts'ebeletso, ho fokotsa nako, ho ntlafatsa tšebeliso ea lisebelisoa.
● Ka mor'a hore liprofaele li phetheloe ho sebetsa, leibole e tla hatisoa ka bo eona 'me e behoe ke mochine o hatisang le oa ho ngola Inthaneteng, o leng bonolo bakeng sa ho hlophisoa ha profil le tsamaiso ea data e latelang.
● Thepa e na le ts'ebetso e feto-fetohang, kemiso ea tlhahiso e bohlale, lisebelisoa tse bohlale le ts'ebetso ea batho.
Mokhoa oa ho kenya data
1.Software docking: inthaneteng ka software ea ERP, joalo ka Klaes, Jopps, Zhujiang, Mendaoyun, zaoyi, Xinger le Changfeng, joalo-joalo.
2.Network/USB flash disk import: kenya data ea ho sebetsa ka kotloloho ka marang-rang kapa USB disk.
3.Ho kenya letsoho ka letsoho.
Setsi sa ho itšeha se koaletsoe ka ho feletseng ho sireletsa, lerata le tlaase, tšireletso le tšireletso ea tikoloho.
E na le pokello ea li-auto scrap collector, lithōle tsa litšila li isoa setsing sa litšila ka lebanta la conveyor, ho fokotsa khafetsa ho hloekisa le ho ntlafatsa katleho ea mosebetsi.
Paramethara e kholo ea tekheniki
| Che. | Litaba | Paramethara |
| 1 | Mohloli oa ho kenya | AC380V/50HZ |
| 2 | Khatello ea moea e sebetsang | 0.5-0.8MPa |
| 3 | Tšebeliso ea moea | 300L/min |
| 4 | Kakaretso ea matla | 19.5KW |
| 5 | Matla a hlooho ea laser | 2KW |
| 6 | Enjene e sehang | 3KW 3000r/min |
| 7 | Boholo ba lehare la saw | φ500×φ30×4.4 Z=108 |
| 8 | Karolo ea ho itšeha (W×H) | 110 × 150 limilimithara |
| 9 | Ho seha angle | 45°,90° |
| 10 | Ho seha ho nepahala | Ho itšeha ho nepahala: ± 0.15mm Ho itšeha perpendicularity: ± 0.1mm Tsela ea ho khaola: 5＇ Ho nepahala ha ho sila: ± 0.05mm |
| 11 | Ho khaola bolelele | 350mm ~ 6500mm |
| 12 | Kakaretso ea boholo (L×W×H) | 15500×4000×2500mm |
| 13 | Boima bo felletseng | 7800Kg |
Lintlha tsa Sehlahisoa
-
CNC Cutting Center bakeng sa Aluminium Profile
-
CNS Corner Connector Cutting Saw bakeng sa Aluminium W...
-
Mochini o Kopantsoeng oa CNC oa ho Epa bakeng sa Aluminium P...
-
Mohala oa tlhahiso o ikemetseng bakeng sa fensetere ea aluminium ...
-
Mochini oa ho Kopitsa o Habeli oa Aluminu oa Aluminu...
-
CNC Glazing Bead Cutting Saw bakeng sa Aluminium Win-door
